Flip And Fold Feature; Bucket Seats - Chevrolet Uplander Owner's Manual

Flip and Fold Feature

(Bucket Seats)

The rear seats in your vehicle can be folded
forward. Use this feature for exiting and entering
third row seats.
2. Fold the seatback flat on the seat, by either
pulling on the nylon strap on the rear of the
seat or lifting up on the lever located on the front
of the seatback. If the seat adjusts, slide it all
the way back.
1-8
1. Ensure the adjustable
head restraints are
fully down.
To return the seat(s) to the normal position, do the
following:
1. Push the seat back and firmly push the rear hooks
onto the rear floor pins by pushing down on the
rear of the seat.
2. Try to raise the seat to check that it is locked down.
3. Lift the seatback recliner lever or pull the nylon
strap on the back of the seat and raise the
seatback until it locks upright.
4. Push and pull on the seatback to check that it is
locked.
3. Release the rear set
of hooks from the floor
pins by pulling the
nylon strap located
at the base of the seat.
Hang on to the strap
to guide the seat
forward.