Chevrolet Uplander Owner's Manual page 258

Problem
I ejected the disc and
tried to take it out, but
it was pulled back into
the slot.
The language in the audio
or on the screen is wrong.
The remote control
does not work.
3-106
Recommended Action
Press the eject
button once.
Press the main menu
button on the remote
control and change the
audio or language
selection on the DVD
menu. To change the
language preference,
press the display button
to access the RSE OSD
menu. See "RSE OSD"
earlier in this section.
Point the remote control
directly at the face of the
DVD unit. The batteries
could be weak or put in
wrong. The parental
control button might have
been pressed, the power
indicator lights will flash.
Problem
How do I get subtitles
on or off?
The auxiliary source is
running but there is no
picture or sound.
The audio or video
skips or jumps.
Recommended Action
Press the subtitle button
on the remote control to
select subtitle option or go
to the DVDs main menu
and follow the screen
prompts.
Press and release the
AUX button on the remote
control or the DVD player
to get to auxiliary input.
Check to make sure that
the auxiliary source is
connected to the inputs
properly.
The DVD could be dirty
or scratched. Try cleaning
the disc.