Housing
3. After the engine cools, open the coolant air bleed
valves.
There are two bleed valves. One is located on the
thermostat housing. The other is located on the
thermostat bypass tube.
5-32
Bypass Tube
4. Fill the radiator with the proper DEX-COOL
coolant mixture, up to the base of the filler
neck. See Engine Coolant on page 5-22 for more
information about the proper coolant mixture.
If you see a stream of coolant coming from an
air bleed valve, close the valve. Otherwise, close the
valves after the radiator is filled.
5. Rinse or wipe any spilled coolant from the engine
and the compartment.
®