Honeywell CT3300 Installation And Programming Instructions page 16

Step 4. Program Cooling Schedule
a. Write in the times and temperatures you want to program for your cooling schedule.
Cooling Schedule
Suggested
Settings
Weekday (Mon–Fri)
Weekend (Sat–Sun)
b. Set the System switch to Cool.
c. Repeat steps 3c. through 3k. to program the weekday and weekend cooling schedule.
Step 5. Check System
Verify that your heating system works
a. Set the System switch to Heat, and the Fan switch to Auto.
b. Press until the setting is 10°F (6°C) above room
temperature (Fig. 25). Your heating system should start and
the fan should run after a short delay.
c. Press until the setting is 10°F (6°C) below room
temperature. Your heating system should shut off.
Verify that your cooling system works
IMPORTANT:
To avoid damaging the compressor in the air conditioner, do not operate the cooling system when the tem-
perature outdoors is below 50°F (10°C).
69-1634—1
Program
Period WAKE
Time
6:00 AM
Temp 78°F (25.5°C)
Time
Temp
Time
Temp
LEAVE
8:00 AM
85°F (29.5°C)
Fig. 25.
16
RETURN
6:00 PM 10:00 PM
78°F (25.5°C) 82°F (28°C)
SLEEP