Download  Print this page

Installation - Honeywell CT3300 Installation And Programming Instructions

Weekday/weekend (5-day/2-day) programmable heat and/or cool low voltage (20 to 30 vac) thermostat and mounting plate
Hide thumbs

Advertisement

MERCURY NOTICE
If you are removing an old thermostat that contains mercury in a sealed tube
(Fig. 1), do not place the old thermostat in the trash. Contact your local waste
management authority for instructions regarding recycling and the proper
disposal of the old thermostat.

Installation

INSTALLATION
Verify You Have Correct Thermostat
Make sure that the CT3300 is the correct thermostat for your heating/cooling system. Read the compatibility chart
below to determine which system you have. If your system is not compatible with the CT3300, the table recommends
an alternate Honeywell model. If you are unsure what type of thermostat is right for your system, visit us on the Web at
www.honeywell.com/yourhome or call Honeywell Customer Care at 1-800-468-1502.
Conventional
Single stage systems that include warm air furnaces and hot water.
Electric Baseboard
Electric-powered heating strips located just above the floor, usually 120 to 240
volts.
69-1634—1
Heating/Cooling System
2
Fig. 1.
Compatible
with CT3300?
Alternate Model
Yes
No
CT1950 for 240
volts
MERCURY
SWITCH
M3701

Advertisement

loading

  Related Manuals for Honeywell CT3300