Adjusting The Picture - Denon DVD-3800BD Owner's Manual

Playback

Adjusting the Picture

BD-V DVD-V DVD-VR DivX ®
You can adjust the picture quality and store the setting you have
adjusted on memory 1-5.
1) During playback, press [MODE] repeatedly until the picture
adjustment menu appears.
• Picture adjustment menu:
Memory1
2) Use [ / ] to select a memory from "Memory1" to
"Memory5" to store your setting, then press [ENTER].
3) Use [ / ] to select a item to be adjusted, then use [
to adjust the setting.
14.
Memory1 V_Position Control
1.
Contrast
2.
Brightness
• To reset to the default setting, press [RETURN], use [
to select "STD", then press [ENTER].
List of picture adjustment item/values
Item
1. Contrast Adjusts the difference between the bright and dark parts of the picture.
2. Brightness Adjusts the brightness of the picture.
1
Strengthens the contours of the picture.
3. Enhancer*
1
4. DNR* Reduces the overall level of noise on the picture.
5. Gamma Correction Detailed adjustment of the picture's brightness.
2
Adjusts the sharpness of the picture for the medium frequency range.
6. Sharpness Mid*
1
7. Sharpness High* Adjusts the sharpness of the picture for the high frequency range.
1
8. Hue* Adjusts the balance between the green and red.
9. White Level Adjusts the white level.
1
10.Black Level* Adjusts the black level.
11.Chroma Level Adjusts the density of the colours.
12.Setup Level Makes the black parts of the pictures brighter.
1
Adjusts the left/right position.
13.H_Position Control*
1
14.V_Position Control* Adjusts the top/bottom position.
1
* Effective for the video signal of COMPONENT VIDEO OUT (except for 480i/576i) and HDMI OUT jacks.
2
* Not effective for the video signal of HDMI OUT jack.
Gamma correction
• To adjust "Gamma Correction", after selecting the item at step 3,
press [ENTER], then use [
• In the graph of gamma correction, the horizontal axis indicates
the brightness level of the image that is recorded on the disc,
and the vertical axis indicates the brightness level of the image
when it is output from this unit.
Memory1
GO : 0 2 4
255
/ ]
0
+1
0
0
0
/ ]
• When bright points of the disc side are adjusted to the "dark" of
the output side, the fine parts of the bright portion that normally
become hard to see, become an easily discerned image.
Description
ENGLISH
/ / / ] to adjust the setting.
5.
Gamma Correction
• When dark points of the disc side are adjusted to the "bright" of
the output side, the fine parts of the dark portion that normally
become hard to see, become an easily discerned image.
4) Press [RETURN] repeatedly to exit.
Note
255
• This setting is not effective for the picture output from VIDEO
• The setting remains even you turn off the unit.
• You cannot adjust the setting during dialog speed, or when
• DNR can also be adjusted by pressing <VIDEO NOISE
-6 to +6 (0)
0 to +12 (0)
0 to +11 (0)
Off to +3 (Off)
16 to 235 (G0=24/G1=32/G2=48/G3=64/ G4=80/G5=96/ G6=128/G7=160/ G8=192/G9=224)
-6 to +6 (0)
-6 to +6 (0)
-6 to +6 (0)
-5 to +5 (0)
-5 to +5 (0)
-6 to +6 (0)
0 IRE : Shows the original picture as recorded.
7.5 IRE : Makes the dark parts brighter.
(0 IRE)
-7 to +7 (0)
-7 to +7 (0)
25
5.
Memory1 Gamma Correction
GO : 0 2 4
255
0
0 255
OUT and S VIDEO OUT jack.
the pure direct is set to "Video Off" or "All Off".
REDUCTION> on the front panel. (refer to page 7.)
Adjustment range (default)
ENGLISH
Playback