Denon DVD-3910 Operating Instructions Manual page 52

ENGLISH
When the Display Position is Selected and Adjusted:
• Press the cursor button (ª), then select the
horizontal/vertical direction with the cursor buttons (
), set the adjustment value with the (•, ª) cursor
1
buttons, and press the ENTER button.
SETUP LEVEL (0 IRE, 7.5 IRE) (Factory default: 0 IRE)
7 • This corrects floating black.
H. POSITION (–7 to +7) (Factory default: 0)
• A 15-step portion of position adjustment is permitted
left and right.
V. POSITION (–3 to +7) (Factory default: 0)
• A 11-step portion of position adjustment is permitted
up and down.
✽ To exit the picture adjust mode
Press the PICTURE ADJUST button.
PICTURE MODE
✽ Only effective for progressive scan.
• When HDMI and DVI signals are output, the SHARPNESS (MID/HI),
CHROMA DELAY and Gamma correction settings will have no effect.
52
STD(STANDARD)
M1(MEMORY1)
1(ADJUSTMENT 1)
M2(MEMORY2)
M3(MEMORY3)
2(ADJUSTMENT 2)
M4(MEMORY4)
M5(MEMORY5)
3(ADJUSTMENT 3)
GAMMA
SET(PIC SETUP)
0 ,
Remote control unit
CONTRAST
BRIGHTNESS
SHARPNESS(MID)
✽
SHARPNESS(HI)
HUE
CCS
WHITE LEVEL
CHROMA LEVEL
✽
CHROMA DELAY
DNR
ENHANCER V
ENHANCER H
G0~G9
SETUP LEVEL
✽
H.POSITION
✽
V.POSITION
P I CT URE MODE
STD M1 M 2 M 3 M4 M5
P I C S E T UP
S E T UP LE VE L
0
0
SET
0