Denon DVD-3910 Operating Instructions Manual page 14

ENGLISH
(4) Connecting a basic 5.1-channel surround system
Analog 5.1-channel audio signals can be output from the DVD-3910.
The multichannel audio signals recorded in packed PCM and the multichannel Super audio CDs can be played when an AV amplifier
equipped with analog 5.1-channel audio inputs is connected.
DVD-3910
Front speaker (left)
Surround speaker (left)
NOTES:
• For multi-channel connections, set "AUDIO CHANNEL" under "AUDIO SETUP" at "SETUP" to "MULTI CHANNEL" and make the
"SPEAKER CONFIGURATION", "CHANNEL LEVEL" and "DELAY TIME" settings. (See pages 38 ~ 40.)
• With the DVD-3910, we recommend turning the digital output off by using the PURE DIRECT MODE and only outputting analog
signals in order to keep interference from the digital output circuitry to a minimum and allow you to enjoy high-quality multi-channel
sound thanks to the high-bit, high sampling frequency. (See pages 47, 48.)
14
Center speaker
SURROUND MODE MULTI FUNCTION
DOLBY DTS WIDE 5CH / 7CH DSP MODE FUNCTION
STEREO SURROUND SURROUND SCREEN STEREO SIMULATION STATUS SELECT
CINEMA / 6.1 / 7.1 VIDEO TONE REC /
ANALOG EXT. IN MUSIC SURROUND ON / OFF DEFEAT M-ZONE 1 M-ZONE 2
INPUT REC SELECT / M-ZONE
AV amplifier with 5.1-channel input terminals
Front speaker (right)
Subwoofer
Surround speaker (right)
CONTROL
for
Taiwan R.O.C.
( or )
To power outlet
for
Southeast Asia