Reebok 710 Treadmill Manual page 16

15. Raise the Frame (104) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (51) so that the large
barrel and the latch knob are oriented as shown.
Remove any ties from the end of the Storage
Latch (51). Attach the lower end of the Storage
Latch to the Base (86) with a 3/8" x 2" Bolt (2)
and a 3/8" Nut (13).
Attach the upper end of the Storage Latch (51)
to the Frame (104) with a 3/8" x 2" Bolt (2) and a
3/8" Nut (13).
16. Attach the Wheels (84) to the Base (86) with two
3/8" x 2 1/2" Bolts (7) and two 3/8" Nuts (13). Do
not overtighten the Nuts; the Wheels must
turn freely.
See HOW TO FOLD AND MOVE THE
TREADMILL on page 26. Lower the Frame (104)
to the floor.
Slide the Left and Right Base Covers (87, 88)
down onto the Base (86).
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the  oor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust
the walking belt (see pages 28 and 29).
15
104
13
Latch
Knob
16
104
87
7
13
84
16
2
51
Large
Barrel
86
13
2
86
13
7
84
88