Reebok 710 Treadmill Manual page 10

2. Make sure that the power cord is unplugged.
Locate the Upright Wire (81) bundled around
the Base (86). Cut the plastic tie securing the
Upright Wire. Route the Upright Wire out of the
indicated hole.
See the inset drawing. Cut the plastic tie near
the Upright Wire (81). Be careful not to dam-
age the Upright Wire.
Press a Base Cap (82) into each side of the
Base (86).
3. Identify the Left Upright (79). Have a second
person hold the Left Upright near the Base (86).
See the inset drawing. Tie the wire tie in the
Left Upright (79) securely around the end of the
Upright Wire (81). Then, insert the Upright Wire
into the lower end of the Left Upright as you pull
the other end of the wire tie through the Left
Upright.
2
86
Cut
82
3
81
Wire
Tie
79
10
81
Tie
Hole
Cut
81
79
81
86
Wire
Tie