Connecting A Tv - Daewoo DVR-S06 User Manual

DF-Q74D2N-JS 2005.12.8 5:8 PM

Connecting a TV

Choose one of the following TV connections, depending on the capabilities of your equipment.
All video signals are available from all video outputs.
work with all input sources, including VHS out of the Component/Progressive Video Output.
RF Coaxial Connection
Connect the RF OUT (TO TV) jack on the DVD
Recorder+VCR to the antenna in jack on your TV using
the supplied coaxial cable (R). If you use this
connection, tune your TV to the DVD Recorder+VCR's
RF output channel (CH 3 or 4).
How to set the DVD Recorder+VCR's RF output channel
Press [SETUP] and select Installation ➝ Modulator
Out to change the RF out channel. For details refer to
page 18.
Audio/Video Connection
1
Connect the VIDEO OUT jack on the DVD
Recorder+VCR to the video in jack on your TV
using the supplied video cable (V).
2
Connect the Left and Right AUDIO OUT jacks
from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the supplied audio cables (A).
S-Video Connection
1
Connect the S-VIDEO OUT jack on the DVD Recorder+VCR to the S-Video in jack on your TV using an S-
Video cable (S).
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
Component Video Connection
1
Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding
input jacks on your TV using a Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available on
your TV.
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
Progressive Scan Connection
• If your television is a high-definition or 'digital ready' television, you may take advantage of the DVD
Recorder+VCR's Progressive Scan output for the highest video resolution possible.
• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.
1
Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding
in jacks on your TV using an optional Y Pb Pr cable (C).
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
• Be sure to set the DVD Recorder+VCR to Progressive Scan mode. (Changing the Scan Mode in the Setup Menu;
see page 22.)
• Progressive Scan does not work with the RF, Audio/Video or S-Video connections.
12
˘ ` 12 mac001 1200DPI 90LPI
That means that whichever TV connection you use, it will
Rear of TV
COMPONENT/PROGRESSIVE VIDEO INPUT
Pr
C
AUDIO OUT
Connections
S-VIDEO
VIDEO
AUDIO INPUT
INPUT
INPUT
Pb Y
L R
S V A
DVD & VCR OUT
OUT IN
R
COMPONENT OUT
Pb
Pr AUDIO
S-VIDEO
OUT L
RESET
COAXIAL Y
DIGITAL
VIDEO
ANTENNA
INPUT
R
ANT. IN
RF OUT