Table of Contents
Advertisement
Connecting with TV
In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in "CHANNEL
SET" screen in VCR operation.
In connecting RF cable to TV, set TV channel to CH3.
Various methods in connecting with TV
<Rear Panel of unit>
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.
AUDIO
18
16
20
12
14
10
8
6
4
3
VIDEO
21
19
17
13
11
15
9
7
3
5
1
<Rear Panel of TV>
Method 4
S-VIDEO
1
1
Method
Method
Remove circular cable (RF cable) (surplus cable) plugged in "ANT.IN" Jack in rear panel of TV. Connect the
cable to "ANT.IN" jack in rear panel of DVD-Video. Connect TV to DVD-Video. Connect "RF OUT" jack in DVD-
Video with "ANT.IN" jack in TV with RF cable.
2
2
Method
Method
: Connecting to a TV that has a audio/video in jacks
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to AUDIO IN
jack in TV with connecting cable of Audio/Video jack. Select VCR mode by pressing [TV/INPUT] button in TV, you
can view more clear screen and sound than connection with RF cable only.
3
3
Method
Method
: Connecting to a TV that has a component video in jacks
Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher quality
pictures. The component video connection only supplies video (picture) in the DVD mode of the DVD-Video.
Therefore, in order to use the VCR features or view TV channels at the DVD-Video, you still need to either
connect the RF coaxial cable between the ANT-OUT jack of the DVD-Video and the TV's Antenna In jack, or
connect the video cable.
12
<Outside Antenna or
Wall Antenna Outlet>
Method 1
Method 2
Method 3
4
4
Method
Method
: Connecting to a TV that has a S-Video in jacks
Use a S-Video cable (not supplied) to enjoy higher quality pictures.
•
VHF: 2 ~13 channels of TV, UHF: 14~69 channels of TV, CATV: Broadcasting is transmitted with cable from
broadcasting station by contract with the station and consumers. It does not need any antenna.
• In/Out jack in Audio/Video terminal: - In: A jack used to receive signal required in this unit from other units.
- Out: A jack used to send signal of this unit to other units.
• Connect with Audio/Video terminal, you can enjoy more clear video and audio. (Use [INPUT] button in this remote
control to select video mode.)
• If screen is broken in connecting COMPONENT Out to Pr, Pb, Y of TV COMPONENT In jack , connect to Cr, Cb, Y.
Connecting with TV
13
Advertisement
Table of Contents
