Error Display - Denon DHT-391XP Service Manual

1. μcom/DSP Version display mode
1.1. Operation specifi cations
μcom/DSP version display mode:
When started up, the version information is displayed.
Starting up:
With the "DIMMER" and "STATUS" buttons pressed, press the "ON/STANDBY" button to turn the power on.
Now, press the "STATUS" button to the display the 2nd item information on the FL Display.
1.2. Display Order
Model name → Main-μcom version → DSP version → iPod Dock version (Connecting iPod Dock)
Display
AVR-391 E3 model
AVR-1311 E2 model
Model name
AVR-391 EA model
AVR-1311 E1C model
Main-μcom version
DSP version
iPod Dock (ASD-1R/11R)
iPod Dock (ASD-3/51)
Cleared of mode:
Press the "ON/STANDBY" button to turn the power off.

1.3. Error display

See the following table for each "Error information" display and its contents (status).
Condition
DSP NG When DSP boot, executing DSP reset makes to becomes error.
DSP OK
State
A V R 3 9 1 E 3
A V R 1 3 1 1 E 2
A V R 3 9 1 E A
A V R 1 3 1 1 E 1 C
M a i n
D S P . * . * . *
D o c k V e r : * * . * *
D o c k : I * * * * * * * *
-
14
* * . * *
D S P
(No error display, version display only)
State
E R R O R 0 1