Memory remapping support
DDR3 UDIMM memory support
UEFI shell Support
AC recovery staggering Power-Up
DIMM mismatch checking
VT-d
The PowerEdge R210 II BIOS does not support the following:
BIOS language localization
BIOS recovery after bad flash
RIB Support
9.2 Supported ACPI States
ACPI compliance: S0, S4, S5 supported
●
No S1, S2, S3 (STR) support
●
S4 supported by OS only
●
Events (Wake Up)
Power Button
RTC alarm
WOL
iDRAC
9.2.1 Power Management Modes
The R210 II uses operating system-based power management.
9.2.1.1
Power Saving BIOS Setting (OS Control)
Intel processors support Demand Based Switching (DBS) which enables the processor to dynamically
change its operating frequency in response to workload changes. The industry standard
implementation of this power management feature is in the Operating System (OS). The OS monitors
process and thread level utilization of the processor and uses processor controls to change the
processor's operating frequency. For heavy workloads, the OS runs the processor at higher
frequencies for additional performance. Lighter workloads do not need high performance, thus the
OS runs the processor at lower frequencies.
Dell PowerEdge R210 II Technical Guide
Table 10.
Supported ACPI States
S0
S1
System ON
—
—
—
—
—
—
S4
S2/S3
Hibernate (OS
supported)
—
—
—
—
S5
Soft
Off
—
—
38