Dell Latitude D600 User Manual page 23

1 device latch release
5. Press the device latch release so that the latch release pops out.
6. Pull the device by the latch release to remove the device from the module bay.
7. Insert the new device into the bay, push the device until you feel a click, and push the device latch release in so that it is flush with the computer.
Windows XP automatically recognizes the new device.
8. If necessary, enter your password to unlock your computer.
Windows 2000
1. Click the Unplug or Eject Hardware icon on the taskbar.
2. Click the device you want to eject and click Stop.
3. Use a #1 Phillips screwdriver to remove the device screw from the bottom of the computer.
1 device latch release