Canon 1670F Printer Manual page 89

Setting Overlay
To make settings for overlay printing click Overlay on the Page Setup tab. The Overlay
dialog box appears. Use Browse to select the file that contains the overlay data.
File Name sets the file name to use as the overlay form.
The File Name dropdown list stores up to nine file names in addition to the default (none)
setting.
You can use Browse to select the file that contains the overlay data.
Overlay Placement
• Background—Check this radio button on to place the overlay data in back of (beneath)
the application data.
• Foreground—Check this radio button on to place the overlay data in front of (over) the
application data.
Position lets you specify the position of the overlay based on its distance from the paper's left
and top edges. Select units of measurement for Left and Top using the Millimeter or Inch
radio buttons. The valid values interval for this setting is 0 to 16.5 inches (0 to 420 mm).
Size lets you set the size of the overlay. Select units of measurement for Width and Height
using the Millimeter or Inch radio buttons. The valid values interval for this setting is 0 to
16.5 inches (0 to 420 mm).
Unit lets you set units of measurement using the Millimeter or Inch radio buttons.
Restore Defaults resets Left, Top, Width, and Height to their default values.
Confirm the settings click OK. The Page Setup dialog box appears again.
3
3-23