Canon 1670F Printer Manual page 113

Problem
"File not found on CD-
ROM" error when
starting the CD-ROM
Menu.
Cannot install CAPT
using a USB port.
(Windows 98/Me/2000/
XP/Server 2003)
* The procedure for Windows XP is given for Category View Mode.
.
Never delete other devices or device drivers. Windows may not operate properly.
IMPORTANT
Cause
The program is
loaded from the hard
disk drive.
USB class driver is
not properly installed.
Solution
Delete the CDMENU.EXE file from your
hard disk drive and restart the CD-ROM
Menu program from the compact disc
labeled "User Software."
Perform the following steps.
1) Make sure the printer is connected to your
computer using a USB cable and the printer is
turned on.
2) For Windows 98/Me/2000, open the
System dialog box from the Control Panel.
For Windows XP*/Server 2003, click
Performance and Maintenance in the
Control Panel click See basic
information about your computer in the
Performance and Maintenance folder. The
System Properties dialog box appears.
3) For Windows 98/Me, select the Device
Manager tab double-click Universal
Serial Bus controllers.
For Windows 2000/XP/Server 2003, select
the Hardware tab click Device Manager
double-click Universal Serial Bus
controllers.
4) Locate the USB class driver under
Universal Serial Bus controllers. Delete
ONLY the USB class driver specified for your
operating system. (If the USB class driver is
displayed under Other devices, delete ONLY
one of the following, depending on your
operating system: Canon iR1510-1670,
Canon CAPT USB Printer, or Unknown.)
For Windows 98, select Canon iR1510-1670
click Delete. For Windows Me, select
Canon CAPT USB Printer
Delete. For Windows 2000/XP/Server 2003,
select USB Printing Support or Canon
CAPT USB Printer
Action menu.
5) Close the Control Panel and unplug the
USB cable.
6) Restart Windows.
click
uninstall from the
5
5-5