Bosch UML-273-90 Installation Manual page 51

Bosch High Performance
HD LED Monitors
PIP
Video Source
Auto
Adjustment
Clock
Frequency
Phase
H Position
V Position
Ambient Light
Sensor
Auto
Detection
Bosch Security Systems, Inc.
Sets the PIP relevant settings.
– PIP Enable: activates the PIP feature.
– Main Input and Sub Input: selects the
video input source for the main picture
and the sub picture. Refer to PIP
Availability, page 52, for the availability
of the input source combinations.
– PIP Size: selects the size of the sub
picture. Choices are: Large and Small.
– PIP Position: adjusts the position of the
sub picture on the main picture. Press the
arrow buttons to make adjustments.
Selects the video input source. Choices are:
AV, S-Video, VGA, YPbPr, DVI, and HDMI.
Auto synchronizes the screen to the graphics
adaptor.
Adjusts the monitor's clock frequency (range
0-31).
Adjusts the monitor's phase range (range
0-31).
Adjusts the monitor's horizontal position
(range 0-31).
Adjusts the monitor's vertical position (range
0-31).
Sets the ambient light sensor. Once enabled,
the monitor automatically adjusts the image
brightness as the ambient lighting conditions
change. Choices are: High, Low, and OFF.
Allows the monitor to automatically switch to
and display an available input signal.
Installation Manual
Navigating the Monitor | en 51
2013.02 | 3.0 |