First-Time Use; Restoring Defaults - Bosch DVR 630/650 Installation And Operation Manual

Video Recorder 630/650 Series
3.2

First-time use

The Quick install menu opens the first time the unit is used. Fill in the basic settings in the
three tabs to get the unit operational. The unit begins recording automatically when the Quick
install menu is closed.
To open the Quick install menu at any other time:
1.
2.
3.
Navigating
Use the supplied USB mouse. Alternatively, use the following front panel keys:
–
–
–
After bootup, the unit presents the log in screen over a quad display. The default User ID is
ADMINISTRATOR, the default password is 000000 (six zeros).
3.2.1

Restoring defaults

To restore the unit to its factory default:
1.
2.
3.
Bosch Security Systems
Press the menu key to bring up the System Control Bar.
Press the menu key again to enter the main menu.
– The main menu appears on monitor A.
Select System, then the Configuration submenu, and finally Quick install.
Use the enter key to select a submenu or item.
Use the arrow
Use the exit key to go back or to switch off the menu.
Remove power from the DVR.
Press and hold the OSD
Supply power to the unit.
– The factory defaults are restored.
Installation and Operation manual
keys to move through a menu or list.
key on the front panel.
Quick install | en 17
F.01U.169.663 | v2.0 | 2012.02