Innova OBD2 Owner's Manual page 60

Using the Diagnostic Tool
I/M READINESS TESTING
4. When a Monitor's Trip Drive Cycle is performed properly, the
Monitor icon on the Diagnostic Tool's LCD display changes from
"flashing" to "solid," indicating that the Monitor has run and finished
its diagnostic testing.
If, after the Monitor has run, the MIL on the vehicle's dash is not
lit, and no stored or pending codes associated with that
particular Monitor are present in the vehicle's computer, the
repair was successful.
If, after the Monitor has run, the MIL on the vehicle's dash lights
and/or a DTC associated with that Monitor is present in the
vehicle's computer, the repair was unsuccessful. Refer to the
vehicle's service manual and recheck repair procedures.
58 OBD2