Erasing Diagnostic Trouble Codes (Dtcs) - Innova OBD2 Owner's Manual

The first time the Vehicle ID function is used, it may take
several minutes to retrieve the information from the vehicle's
computer.
3. When the retrieval process is completed,
the vehicle ID information is shown on
the Diagnostic Tool's display. Use the
UP and DOWN
necessary, to view the entire list.
4. When you have finished viewing the
retrieved vehicle ID information, press the
ENTER/FF
Viewing Available Modules
The Diagnostic Tool can retrieve a list of modules supported by the
vehicle under test.
1. From the Vehicle Information menu, use
the UP
necessary, to highlight Available Modules,
then press the ENTER/FF
2. A "One moment please..." message
displays while the requested information
is retrieved from the vehicle's computer.
3. When the retrieval process is com-
pleted, a complete list of modules
supported by the vehicle under test is
shown on the Diagnostic Tool's display.
Use the UP
as necessary, to view the entire list.
4. When you have finished viewing the list of available modules, press
the ENTER/FF
The Diagnostic information retrieved can be transferred to a
personal computer (PC) with the use of an optional Tek-Link
program. See documentation that comes with program for
instructions.

ERASING DIAGNOSTIC TROUBLE CODES (DTCs)

When the Diagnostic Tool's ERASE function is used to
erase DTCs from the vehicle's on-board computer,
"Freeze Frame" data and manufacturer-specific-enhanced
data are also erased. "Permanent" DTCs ARE NOT erased
by the ERASE function.
If you plan to take the vehicle to a Service Center for repair, DO NOT
erase the codes from the vehicle's computer. If the codes are erased,
valuable information that might help the technician troubleshoot the
problem will also be erased.
OBD2
Using the Diagnostic Tool
ERASING DIAGNOSTIC TROUBLE CODES (DTCs)
buttons, as
button to return to exit.
and DOWN buttons, as
button.
and DOWN
button to the OBD2 DTC screen.
buttons,
51