Configuring Display Rotation Options; Orientation; Display Rotation - 3Dlabs WILDCAT REALIZM 800 User Manual

The Display Rotation tab allows you to check or redetect the automatic orientation of your display
(if supported in the display hardware). It also provides controls to manually rotate your display as
needed.

Configuring Display Rotation Options

Orientation

Redetect Orientation: Some display devices have built-in hardware support for rotation. If your
display device supports hardware rotation, click this button to use the desired orientation format.
Note: You must configure your display first.

Display Rotation

If your display does not support hardware rotation, use these display rotation controls to manually
rotate the display through 0, 90, 180 and 270 degrees.
Rotation Arrows: In 90 degree increments clockwise or counter clockwise, allows the display
rotation options to be stepped through.
0 degrees: Default display orientation.
90 degrees: Rotates the display 90 degrees clockwise from the default display orientation.
180 degrees: Rotates the display 180 degrees clockwise from the default display orientation.
270 degrees: Rotates the display 270 degrees clockwise from the default display orientation.
NOTE: Display rotation is available on the Wildcat Realizm 100, 200, and 500 graphics
accelerators. [It is not available for the Wildcat Realizm 800.]
24
S
OFTWARE
3Dlabs Wildcat Realizm Graphics Accelerator User's Guide
C
ONFIGURATION