Table of Contents
Advertisement
Verifying under Windows XP
1.
From the Windows Start menu, go to Control Panel/Performance and Maintenance/
System/Hardware/ Device Manager.
2.
Under Display Adapters, verify that the Wildcat Realizm device is listed. This indicates that the
appropriate driver is installed.
3.
Exit the Device Manager and Control Panels
Verify the System Startup Version
Verifying under Windows 2000
1.
From the operating system Start menu, go to Settings/Control Panel/System/Advanced.
2.
Click Startup and Recovery.
3.
On the Startup and Recovery dialog box, verify that "Microsoft Windows 2000 Professional" is
the listed as the Default operating system. It is IMPORTANT that your operating system matches
the driver you installed. Click OK.
4.
Click OK again to close the System Properties dialog box.
Verifying under Windows XP
1.
From the operating system Start menu, go to Control Panel/Performance and
Maintenance/System/Advanced. This is different if you run in Classic View and instructions
should be as for Windows 2000.
2.
Click the Settings button under Startup and Recovery.
3.
On the Startup and Recovery dialog box, verify that "Microsoft Windows XP Professional" is the
listed as the Default operating system. It is IMPORTANT that your operating system matches the
driver you installed. Click OK.
4.
Click OK again to close the System Properties dialog box.
Registering Your 3Dlabs Graphics Accelerator Card
When you register your 3Dlabs Graphics Accelerator Card you:
Activate your warranty
Receive notification of software updates
Qualify for technical support
Register on-line once your hardware and software installations are complete.
•
Go to
http://www.3dlabs.com
the registration form that appears on your screen, and click Submit when you are
finished.
16
and click on the support link, then the register link. Fill out
3Dlabs Wildcat Realizm Graphics Accelerator User's Guide
S
ETUP
- Quick Links:
- System Requirements
Hide quick links:
Advertisement
Table of Contents
