Main Menu - Bosch 430 Series Installation And Operation Manual

36 en | Operating instructions
5.6.3

Main menu

Camera
The Camera menu is used to configure recording settings for the unit. The menu contains
eight submenus:
Schedule
The Schedule menu is used to set recording types according to the hour and day of the week
and for exception days.
Display
The Configuration menu contains three submenus:
–
–
–
Event
The Event menu contains four submenus:
–
–
–
–
Network
The Network information menu contains four submenus:
–
–
–
–
System
The System information menu contains seven submenus:
–
–
–
–
F.01U.168.054 | v2.0 | 2012.05
– Camera - per camera Enable, Name of the camera, Covert, and Audio
– Video Adjustment - per camera Brightness, Contrast, and Color
– PTZ - per camera Port, Address, Protocol, and Baud Rate
– Continuous Recording - per camera Resolution, Quality, and Frame Rate
– Input Recording - per camera Resolution, Quality, Frame Rate, Pre-event, and Post-
event
– Motion Recording - per camera Resolution, Quality, Frame Rate, Pre-event, and Post-
event
– Network Live Streaming - per camera Enable, Resolution, Quality, and Frame Rate
– Video Format - NTSC, PAL, or Auto Detect; VGA Output - select required VGA
resolution
Language - set the language option for the unit
Monitor A - show Camera Name and Status, Date and Time, Playback and HDD Status,
and configure Sequence Dwell Times
Monitor B - show Camera Name and Status, Date and Time, and configure Sequence
Dwell Times
Input - per input Input Type, Camera, Relay Output, and PTZ preset
Motion - per camera Sensitivity, Relay Output, and Area setup
Alarm Acknowledge - Toggle between Post-event time and Manual
System - enable alarms for Disk fail, Disk full, Fan fail, System/Disk temperature,
Administrator Password change, Video loss, and Power On.
TCP/IP - enable DHCP, set IP Address, Subnet, Gateway, DNS, HTTP Port, and Bandwidth
limit
DDNS - set dynamic DNS for dyndns.org, sitesolutions.com, and tzo.com
Notification - send e-mail notification on Input, Motion detect, Disk fail, Disk full, Fan fail,
System/Disk temperature, Administrator Password change, Video loss, Power On
Mail - set SMTP server, SSL, User name, Password, To 1-3, From, and Subject.
Date/Time - set Date, Time, Date format, Time format, Time zone, and Daylight Savings
NTP - set NTP Time Server and Sync interval
Beeper - set unit to beep on Button, Input, Motion, System, or Video loss
User - set Usernames, Passwords, and User Levels for Users 1-10
Installation and Operation manual
Video Recorder 430/451 Series
Bosch Security Systems