Table of Contents
Advertisement
Video Recorder 430/451 Series
Full-screen
To view a full-screen shot of a camera:
–
Sequence
To view a sequence of live camera pictures of several cameras:
1.
2.
Cameo assignment
Assigning cameras to cameos in a quad view:
1.
2.
3.
4.
5.
This cameo assignment is used in playback mode as well as in live mode.
Freeze image
Freezing a camera shot on monitor A:
1.
2.
3.
If viewing a camera picture in full-screen mode, then this picture is frozen. The zoom function
can be used on a frozen picture.
Zoom
To zoom in on a video image:
1.
2.
3.
Alternatively, right click and select Zoom or Exit zoom to enable or disable zoom mode with
the mouse. While in zoom mode, click on an area of the screen to zoom in on.
Bosch Security Systems
Press a camera key.
–
A full-screen shot of the analog camera that was selected appears.
Press the sequence
–
A sequence of camera pictures appears, each for a pre-programmed dwell time.
Press the sequence
–
Zooming, pressing the quad
sequencing.
The cameo with the yellow border is the selected cameo.
Use the arrow keys to select a cameo.
Press the enter
key to display the Cameo Menu.
Use the arrow keys to select a camera to put in the cameo and press the enter
Alternatively, right click a cameo with the mouse and choose a video input from the
Cameo Menu.
Press the pause
key to freeze the picture in the active cameo.
Press the stop
key to return to live viewing.
Alternatively, right click and select Freeze or Unfreeze from the context menu using the
mouse.
Press the zoom
key.
–
The picture is enlarged by a factor of 2.
Use the arrow keys to select the area of the picture to be displayed.
Press the zoom
key again to return to a full picture and leave the zoom mode.
Installation and Operation manual
key.
key to stop sequencing.
key, or selecting a single camera also stops
Operating instructions | en
key.
F.01U.168.054 | v2.0 | 2012.05
33
Advertisement
Table of Contents
