Step 2: Pulling And Marking The Wires; Table 4: Typical Wire Planning Chart For The D9210B; D9210B Operation And Installation Guide - Bosch D9210B Operation And Installation Manual

D9210B
Installation
3.2.2 Pulling and Marking the Wires
Running wire. Use Table 4 to estimate the wire bundle size for your knockouts and where to mount the D9210B. Tag
your wire runs to prevent confusion during installation and troubleshooting. Figure 2 shows the wiring for a typical
D9210B installation.
Purpose
Power/SDI data
RTE power/input*
REX power/input*
Strike power*
Door contact*
Reader*
Buzzer*
Emergency Exit*
Power Supply
Transformer
* Be sure to multiply the wires by the number of D9210Bs in the enclosure.
32206G
Suggested Approximate
Wire Tag Diameter
Tag A 0.25 in.
(6.4 mm)
Tag B 0.25 in.
(6.4 mm)
Tag C 0.25 in.
(6.4 mm)
Tag D 0.375 in.
(9.5 mm)
Tag E 0.125 in.
(3.2 mm)
Tag F 0.375 in.
(9.5 mm)
Tag G 0.125 in.
(3.2 mm)
Tag I 0.125 in.
(3.2 mm)
Tag J 0.25 in.
(6.4 mm)

Table 4: Typical Wire Planning Chart for the D9210B

D9210B Operation and Installation Guide

Page 14
Recommended Wire Recommended
Type Color Code
4/22 AWG quad SDI:
(Green)
(2500 ft. / 762 m)
4/18 AWG quad
(Yellow)
(5000 ft. / 1,524 m)
Pwr:
4/22 AWG quad Green/Black
4/22 AWG quad Yellow/Black
2/16-18 AWG zip Red
2/22 AWG White
(500 feet / 152 m)
6/22 AWG 12 VDC: Red
conductor
5 VDC: Orange
(500 feet / 152 m)
COM: Black
D1: White
D0: Green
LED: Brown
Buzzer: Yellow
2/22 AWG twist +(Red), - (Blk)
2/18 AWG twist Blue
2/18 AWG zip Brown
© 2002 Bosch Security Systems
A
B
+ (Red)
- (Black)