Operating Voltage - Mark Levinson 380 Owner's Manual

Operating Voltage

The Nº380 Preamplifier is set at the factory (internally) for 100V, 120V,
200V, 230V, 21...ˆ, or 240V AC mains operation @ 50 or 60Hz. (230V/
50Hz only in European Union countries, in compliance with CE regula-
tions.) This voltage setting cannot be changed by the user.
Make sure that the label on the bottom panel of the Nº380 (adjacent to
the AC cord) indicates the correct AC operating voltage for your loca-
tion.
If the voltage indicated on your Nº380 is incorrect, or if you wish to
change the AC operating voltage of your Nº380 as the result of moving
to a different country than the one in which you purchased your digital
audio processor, see your Mark Levinson dealer.
The Nº380 is easily powered by a normal 15-ampere AC mains line. If
other devices are also powered from the same AC line, their additional
power consumption should be taken into account.
8