Mark Levinson 380 Owner's Manual page 10

10
4 Plug the Nº380 into the wall outlet
Connect the AC cord to the male IEC connector on the center of
the bottom panel of the Nº380, then connect the AC cord to the
AC mains. When power is first applied, the Nº380 will initialize
(showing all current input names), automatically select the first
available input (CD1), and set its output level to OFF. (If you used
input 3, select it now.)
5 Turn on your source component; Turn on your power ampli-
fier; Slowly raise the volume on the Nº380 to a comfortable
level
Congratulations! You should now be able to enjoy your favorite
music while reading the rest of this manual.