Programming An Automatic Volume Level - Mark Levinson 380 Owner's Manual

programming an
automatic volume level
28
The Nº380 also features the ability to remember a "preferred" output
level setting, to which it will return whenever you select a particular in-
put. This capability is a great convenience when used with tuners, for
example, since their output level is often more consistent than other
sources, and since tuners may be used primarily for background
(rather than critical) listening. This adjustment may be made for each
input independently of any other input.
In order to take advantage of this
low the steps below:
1 Select the Input whose level you would like to "Automate"
2 Adjust the volume to your preferred level
This will be the preferred, programmed level.
3 Press and hold the Mode button on the front panel
Hold the mode button until the display reads "
low:
4 Turn the volume knob counterclockwise from 0.0 until the
Display reads "AUTO"
The display will initially look like the illustration below:
When the volume knob is rotated counterclockwise, the display
will change to resemble the illustration shown below:
automatic volume level
SET DATA
setting, fol-
," as be-