Checkup Grounding - Daewoo DTA-240L Installation And Owner's Manual

CHECKUP GROUNDING

Attachments for grounding are not included in product.
1. Select proper place to install the grounding bar.
• For grounding, wet and solid ground is preferred to one covered with sand or pebbles.
• Select the place far away from gas/water pipes, telephone lines, underground cables, or other structures.
• The grounding must be carried out at least 2m from a lightening rod.
• A ground wire for telephone is not to be used for air conditioner.
2. Wrap the rest part of the pipe connected to the outdoor unit with the isolation tape and complete the grounding.
3. Install green or yellow ground wire.
• In case the ground wire is too short, extend the wire, wrapping the extended part with the isolation tape.
Don't bury the connected part.
• Fix the ground wire using a clamp.
In case the ground bar is installed where people pass, it must be fastened tight.
4. Connect the ground wire to the terminal plate on the outdoor unit.
12