Service Information - Black & Decker LPP120 Instruction Manual

20v max lithium pole saw

Hide thumbs Also See for LPP120:

Instruction manual (56 pages)

Instruction manual (56 pages)

Instruction manual (54 pages)

Table of Contents

Available languages

Enlarged version

trouBleshootinG Con't.

problem

possible Cause

• Poor cut

• Chain tension set

quality.

incorrectly.

• Chain needs

replacement.

• unit runs but

• Chain installed

does not cut.

backwards.

For assistance, visit our website www.blackanddecker.com for

the location of the service center nearest you or call the

BLACK & DECKER help line at 1-800-544-6986.

possible solution

• Refer to section on

adjusting chain tension.

Note: Excessive tension

leads to excessive wear

and reduction in life of bar

& chain.

Lubricate after every 10

minutes of use.

Refer to section for

installation of chain.

• Refer to sections for

installing and removing

chain.

warninG:

any type of accessory or attachment. Such usage might be

hazardous.

the rBrC™ seal

The RBRC™ (Rechargeable Battery Recycling

Corporation) Seal on the LI-ION battery (or battery

pack) indicates that the costs to recycle the battery (or

battery pack) at the end of its useful life have already been paid by

Black & decker.

RBRC™ in cooperation with Black & decker and other battery

users, has established programs in the united States to facilitate the

collection of spent LI-ION batteries. Help protect our environment

and conserve natural resources by returning the spent LI-ION battery

to an authorized Black & decker service center or to your local

retailer for recycling. You may also contact your local recycling center

for information on where to drop off the spent battery.

registered trademark of the Rechargeable Battery Recycling Corporation