Table of Contents
Advertisement
Button:
Function:
ENT
Confirms a selection; when used while a menu option
is displayed, displays current setting
A
Lets you specify "bank A" when recalling or saving an
A/V preset
PRE (PRESET)
Not used (for future applications)
NUMBERS 0-9
Lets you select an A/V preset when followed by
ENTER; when used in combination with FREQ, lets
you enter station frequency
U (star)
Used for advanced operations in conjunction with the
numeric key pad (0-9)
REV (REVIEW)
Presents a series of displays showing the current
settings (repeatedly pressing REV steps faster)
DISP (DISPLAY)
Lets you turn the front panel display on or off
SAVE
Lets you save either an A/V preset or station preset;
press SAVE then either numeric buttons 0-9 for saving
an A/V preset, or use STATION -/+ to save a station
preset, press ENTER to save your selection
ENTER
Confirms a selection; when used while a menu option
is displayed, displays current setting
TUNER
Selects internal TUNER
TEST
Lets you calibrate speakers using the built in test noise
signal
DEL +/-
Lets you increase (+) or decrease (-) the rear channel
delay time
CTR +/-
Lets you increase (+) or decrease (-) the center
channel volume
REAR +/-
Lets you increase (+) or decrease (-) the surround
channels volume
SUB +/-
Lets you increase (+) or decrease (-) the subwoofer
channel volume
FREQ
Lets you directly tune in a station frequency by
specifying it with the numeric keypad
BAND
Selects AM or FM frequency band
STA- / STA+
Selects station presets by moving down (STA-) or up
(STA+)
Page 13
Advertisement
Table of Contents
