Table of Contents
Advertisement
External devices
Connecting audio amplifiers
The sound components wizard permits configuration of different audio
amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM).
See the operating manual of the audio amplifier for more information.
MENU: Call TV menu.
Select Connections,
go to the menu line below.
Select Sound components.
OK calls the sound components wizard
SOUND COMPONENTS
Sound playback via ...
TV speakers
Speaker system
HiFi/AV amplifier
Sound projector
HiFi/AV amplifier or TV speakers (switchable)
Sound projector or TV speakers (switchable)
Proceed
OK
Mark the HiFi/AV amplifier.
OK Proceed.
Select whether the sound is to be transmitted digi-
tally or analogue to the the amplifier. Continue,
depending on the amplifier, see right column.
Explanations of the setting possibilities:
➠ Settings for the sound projector: See operating manual
of the sound projector.
HiFi/AV
Select setting when an amplifier is connected and the TV
amplifier
speakers are not used.
HiFi/AV
Select setting when an amplifier is connected and the TV
amplifier or TV
speakers are used. The sound can be switched between
speakers
the amplifier and the TV speakers in the listen mode
(switchable)
selection.
Sound
Specify sound formats which can be decoded with the digital
formats
amplifier (see operating manual of the used amplifier).
Type of
Select either stereo or surround amplifier.
amplifier
TV loudsp. as
For every connected surround amplifier, select whether
centre speaker
the TV loudspeakers are to be used as centre speaker.
If so, establish a connection between the centre output
of the amplifier and the centre input of the TV set
CENTER IN with a cinch cable.
Attention: Do not use the centre speaker connection of
the amplifier, use the centre pre-amp output instead!
- 124
Connecting digital audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO DIGITAL OUT with
the digital audio input of the amplifier via a cinch cable:
Digital amplifier
DIGITAL IN
OK
Sound formats, amplifier type and other settings, see explanations of the
setting possibilities (left hand column).
Connecting analogue audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select no.
Connect the analogue audio output of the TV set to the analogue audio
input of the amplifier with a stereo cinch cable with the AUDIO LINK
adapter cable (see accessories on page 145):
Analogue amplifier
AUX IN
L
R
For selecting the amplifier type and making other settings, see explana-
tions of the setting possibilities (left hand column).
TV set
AUDIO
DIGITAL
OUT
TV set
SR
SL
AUDIO
SUB
LINK
C
R
L
Advertisement
Table of Contents
