Switching Display Modes; Switching The Visual Source Only (Simul Function) - Alpine IVA-D900R Owner's Manual

2
Rotary encoder
WIDE/DISP.
SOURCE/POWER

Switching Display Modes

While your vehicle is parked, press and hold WIDE/
DISP. for at least 2 seconds in the visual source.
Each press changes the display modes as follows:
MODE 1 → MODE 2 → MODE 3 → MODE 1
(WIDE) (NORMAL) (CINEMA)
MODE1
In Mode 1 (Wide), the monitor displays a normal picture wider
to fit in a wide-screen monitor by evenly stretching out the
picture horizontally.
MODE2
In Mode 2 (Normal), the monitor displays a normal picture at
the center of the screen with a vertical black band at each
side.
28
-EN
In Mode 3 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode
is good for displaying a cinema type picture at the 16 : 9 ratio.
Switching the Visual Source Only
(Simul Function)
You can watch the video portion of another source while listening to
the current source.
1
2
3
(WIDE)
4
MODE3
While your vehicle is parked, press SOURCE/
POWER.
The main menu appears on the display.
Press 2 (V.SEL) to select the video portion.
Turn the Rotary encoder and select your desired
video source.
When "INFO.DISP" is selected, the main display shows
playing disc (DVD, Video CD) status or auxiliary input
(AUX, TV, etc.) status.
If the spectrum analyzer has been set in "Displaying
Spectrum Analyzer (page 33)", the spectrum analyzer
mode display appears here.
(Example)
Picture DVD
-
Voice DVD
CAMERA NAV.
/ /
DVD DVD
* If a DVD player is connected, you can receive the DVD
picture/sound.
DVD player (DVA-5205P) or DVD changer (DHA-S680P) is
connected:
Press and hold V.OUT on the remote control supplied with the
DVD player or DVD changer for more than 2 seconds. The
picture and sound of the DVD will be output.
The DVA-5210 is connected:
Press V.OUT on the remote control (included with the DVA-
5210) to output DVD picture/sound.
• The Simul function cannot be used when the Audio source is
in the navigation mode.
• By pressing V.SEL for more than 2 seconds, the Simul
function is canceled. (Even if 2 (V.SEL) of the function
button is pressed for more than 2 seconds, it is not canceled.)
Press the Rotary encoder to execute the
selection.
∗
INFO.DISP AUX1
- -
DVD DVD
AUX3 AUX2
/ /
DVD DVD