Resetting The Administrator Password - Iomega StorCenter px6-300d User Manual

110

Resetting the administrator password

This procedure should only be used if there are no administrator users with valid passwords. If a non-administrator user, or another
administrator, forgets their password, another administrator user can reset it for them if you have created more than one administrator user.
Refer to Modifying a user
non-administrator users and any manual network configuration settings will have to be reset.
1. To reset the Iomega StorCenter px6-300d press the small recessed button on the back. The Iomega StorCenter px6-300d will restart and all
administrator users will revert to non-administrator users.
2. When your Iomega StorCenter px6-300d device finishes restarting, open the Iomega StorCenter px6-300d Console. The Device Setup steps will appear
again. Create an administrator user. You can use the same name as a previously created user, since this process will make that user an administrator.
3. Complete the Device Setup as described in Setup.
If you had more than one administrator user, you will need to edit each user individually to make them administrators again. Refer to
Modifying a user.
for more information. Resetting the Iomega StorCenter px6-300d will result in all administrator users reverting to
Iomega StorCenter px6-300d