Table of Contents
Advertisement
Rear Panel
"Power cord socket" Plug the power jack of the included power adapter to Video
Receiver. Connecting the power adapter should be the last operation while physically
installing Video Receiver.
"Reset button" Refer to the Appendix Troubleshooting for the detailed usage of
system recovery.
"General I/O terminal block" Video Receiver provides a very flexible general I/O
interface to combine with the user's security devices such as alarms, lighting or door
locks. One green connector is included in the package to connect the external devices.
The general I/O terminal block has 10 pins for device control. These pins can be divided
into three categories based on their functions, including power source, RS485 and
digital outputs.
No.
Pin description
1
AC power input
2
AC power input
3
Digital output 1
4
Digital output 2
5
Digital output 3
6
Digital output 4
7
DC power output (+)
8
DC power output (-)
9
RS485_A
10
RS485_B
"Ethernet 10/100 RJ45 socket" Connect to an Ethernet network with a UTP
category 5 cable of length shorter than 100 meters according to the standard.
Regulation
24V AC
24V AC
Darlington, Max. 500mA
Darlington, Max. 500mA
Darlington, Max. 500mA
Darlington, Max. 500mA
12V DC, Max. 0.5A
Ground
D+, non-inverting
D-, inverting
- 7 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Advertisement
Table of Contents
