Operation On A Camera View Cell; Ptz Panel - Vivotek RX9401 User Manual

2-2. Operation on a Camera View Cell

The following apply when a camera view cell is selected.

2-2-1. PTZ Panel

Once you selected a camera, click on the PTZ button on a camera portal.
The PTZ panel will prompt. Below are the description of its functions:
Zoom in
1. PTZ control: Click and drag the nudget in the center towards the direction you wish
to move to.
2. Focus: Click on the Focus near and Focus far buttons to adjust camera focus.
3. Home: Click to move the camera lens towards the default home position.
4. Zoom: Use the Zoom in and Zoom out buttons to adjust the camera's zoom ratio.
5. Presets: If you configured preset positions, a list of preset positions will appear.
6. Patrol: If you configured preset positions into a patrolling tour, click on this button
and the camera will proceed with patrolling through preset points.
Note that on a speed dome camera, the farther you pull the nugget away from the
center, the faster the lens moves. This works like speed control.
VIVOTEK - Built with Reliability
List of preset positions
Zoom out
Focus far
Focus near
Home
Starts patrol
User's Manual - 25