Table of Contents
Advertisement
Hardware Installation
Please verify that your product package contains all the accessories listed in the
foregoing Package Contents. Depending on the user's application, an Ethernet cable
may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not
exceed 100 meters in length.
Connect the power adapter jack to the Video Receiver
before plugging in to the power socket. This will reduce
the risk of accidental electric shock.
Shut down all the peripheral devices prior to connection. The video BNC/S-Video,
Ethernet cable and power adapter are essential for basic viewing function. Refer to the
related configuration section for detailed description.
Upon powering up, the front red LED will become lighted first and then the device will
go through booting process. During the booting process, red and green LEDs will be
on. After booted, the Video Receiver will standby for getting IP address. After getting IP
Address, the green LED will blink every second.
- 8 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Advertisement
Table of Contents
