Set Server Parameter Values - Vivotek RX7101 User Manual

HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n

Set server parameter values

Note: This request require administrator access
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/setparam.cgi?
[nosync=<value>&]<parameter>=<value>
[&<parameter>=<value>...][&return=<return page>]
parameter
<group>[_<subgro
up>]_<name>.
return
Return:
HTTP/1.0 200 OK\r\n
value
value to assigned
<return page>
- 39 -
description
Assign <value>
<group>_<name>.
Redirect to the page <return page> after the
parameter is assigned. The <return page>
can be a full URL path or relative path
according the the current path. If you omit
this parameter, it will redirect to an empty
page.
(note: The return page can be a general HTML
file(.htm, .html) or a VIVOTEK server script
executable (.vspx) file. It can not be a CGI
command. It can
parameters. This parameter must be put at
end of parameter list)
to the parameter
not have any extra
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532