Table of Contents
Advertisement
I/O settings
Video output
Video output modulation type. It can be "NTSC" or "PAL".
"Enable Overscan mode" Select it if you has smaller displayable area of your device.
Audio output
The audio output volume can be tuned in Video Receiver.
Digital output
Video Receiver supports four digital outputs, and they can be configured to follow the
digital output of video source. This function is only for "Single channel mode" and
"Quad display mode". "Sequential display mode" does not support this function.
In addition, if the linked video source does not support digital output, the D/O function
will be disabled.
The digital output will follow D/O #1~#4 (Ex:
) of channel 1~4 (Ex:
).
- 30 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
Advertisement
Table of Contents
