Assembly - ProForm 1150ci User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable spanners and Phillips
screwdriver .
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the
quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is
not in the parts bag, check to see if it has been pre-attached.
M8 Nylon M10 Black Nylon M8 Split M10 Black Split
Locknut (10)–4 Locknut (63)–4 Washer (70)–4 Washer (50)–3
M10 x 27mm Button
M4 x 16mm M6 x 25.4mm Button
Screw (51)–3
Screw (66)–1 Screw (33)–1
M10 x 112mm Carriage Bolt (65)–4
4