Table of Contents
Advertisement
ASSEMBLY
STEP 1
Lift the front of the main frame and fit the Front
Stabilizer (56) with 2 x Carriage Bolts (35), 2 x
Curved Washers (60), 2 x Spring Washers (59) and
56
2 x Cap Nuts (32). Now repeat this process for the
32
Rear Stabilizer (34).
59
60
35
34
STEP 2
Attach right pedal (18R) on the right pedal crank.
(NOTE: The screw direction is clockwise).
Now repeat this process for the left pedal (18L).
18L
(NOTE: The screw direction is anti-clockwise).
Then mount the pedal straps left and right on the
associated pedals.
Note : The pedals are signed with "L" for left
and "R' for Right.
18R
STEP 3
Carefully lift the Handlebar Post (7) until it is verti-
cal.
7
Slide the front plastic cover (62) onto handlebar
post (7).
66
Join the upper Computer Cable (66) to the lower
Computer Cable (61).
Then put the Handlebar Post into Main Frame, and
62
secure them with 4 Curved Washers (60), 4 Spring
61
Washers (59) and 4 Allen Bolts (58).
60
59
58
4
Hide quick links:
Advertisement
Table of Contents
