Page 1
Model No. IMEL2305.1 USER'S MANUAL Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT Visit our website at Visit our website at DIRECTLY.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the elliptical exerciser. 1. Read all instructions in this manual and all 8. Wear appropriate exercise clothes when warnings on the elliptical exerciser before using the elliptical exerciser.
BEFORE YOU BEGIN Thank you for selecting the new IMAGE ® 8.25 ellipti- product model number and serial number before con- cal exerciser. The IMAGE 8.25 is an incredibly tacting us. The model number is IMEL2305.1. The smooth exerciser that moves your feet in a natural serial number can be found on a decal attached to the elliptical path, minimizing the impact on your knees elliptical exerciser (see the front cover of this manual).
ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own Phillips screwdriver , an adjustable wrench...
Page 6
To make assembly easier, read the informa- tion on page 5 before you begin assembling the elliptical exerciser. Attach the Rear Stabilizer (35) to the Frame (1) with two M10 x 75mm Carriage Bolts (58) and two M10 Nylon Locknuts (84). Press the Stabilizer Endcaps (36) onto the Rear Stabilizer (35) as shown.
Page 7
4. Identify the Left Pedal Arm (21), which is marked with a sticker. Attach a Pedal (19) to the Left Pedal Arm with three M4 x 19mm Screws (68) and three Star Washers (85). Attach the other Pedal (not shown) to the Right Pedal Arm (not shown) in the same way.
Page 8
6. Apply a generous amount of grease to the axle on the left Upper Body Leg (6). Then, apply grease to a Large Wave Washer (20) and slide it onto the axle. Apply a generous amount of grease to the Left Grease Crank Arm (42).
Page 9
9. While another person holds the Console (10) near the Upright (2), connect the Upper Wire Harness (18) to the wire harness on the Console. Avoid pinching the wire harnesses during this step Attach the Console (10) to the Upright (2) with four M4 x 16mm Screws (60).
HOW TO USE THE ELLIPTICAL EXERCISER HOW TO MOVE AND LEVEL THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER EXERCISER To move the elliptical exerciser, stand in front of it, To mount the elliptical exerciser, firmly hold the upper place one foot against one of the wheels, and firmly body arms and carefully step onto the pedal that is in hold the upper end of the upright.
Page 11
CONSOLE DIAGRAM FEATURES OF THE CONSOLE To track your walking exercise, the console also features the MyTracks™ StepCounter program that allows you The console offers a selection of features designed to to enter the number of steps that you plan to pedal, make your workouts more effective.
The next section of HOW TO USE THE MANUAL MODE the display will show the approximate num- ber of calories you Press any button on the console or begin have burned and the pedaling to turn on the console. resistance level of the pedals.
Page 13
As you exercise, the HOW TO USE A SMART PROGRAM display will prompt you to keep your ped- aling pace near the Press any button on the console or begin ped- pace setting for the aling to turn on the console. current period.
Page 14
Select the MyTracks™ StepCounter program. HOW TO USE A CALORIE PROGRAM To select the Press any button on the console or begin MyTracks™ pedaling to turn on the console. StepCounter pro- gram, press the When the console is turned on, the display will 10,000 Steps button.
MAINTENANCE AND TROUBLESHOOTING Inspect and properly tighten all parts of the elliptical Switch. Loosen, but do not remove, the indicated exerciser regularly. Replace any worn parts immedi- M4 x 16mm Screw (60). Slide the Reed Switch slight- ately. The elliptical exerciser can be cleaned with a ly closer to or away from the Magnet, and then soft cloth and mild detergent.
CONDITIONING GUIDELINES Fat Burning WARNING: To burn fat effectively, you must exercise at a relative- ly low intensity level for a sustained period of time. Before beginning this or any exercise pro- During the first few minutes of exercise, your body gram, consult your physician.
PART LIST—Model No. IMEL2305.1 R0307A Key No. Qty. Description Key No. Qty. Description Frame Clamp Upright Reed Switch/Wire Front Stabilizer Flywheel Left Upper Body Arm Flywheel Axle Right Upper Body Arm Flywheel Bearing Upper Body Leg “C” Magnet Leveling Foot “C”...
• the MODEL NUMBER of the product (IMEL2305.1) • the NAME of the product (IMAGE 8.25 elliptical exerciser) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the part(s) (see pages 17 to 19) LIMITED WARRANTY ICON Health &...
Need help?
Do you have a question about the 8.25 Elliptical and is the answer not in the manual?
Questions and answers