Healthrider H50 Crosswalk Sl Treadmill User Manual page 13

13. Attach the Latch Housing (67) with the Latch
Spacer (44) to the Left Upright (66) with two #10
x 1 1/2" Screws (86); make sure that the knob
is on the indicated side. Start both Screws,
and then tighten them. Do not overtighten the
Screws.
14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see pages 24 and 25).
13
67
Knob
86
13
66
44