Advertisement
Zoneline
units
®
8-/8"
6-1/2"
* A-B Series: Zonelines built before 1987 – Zoneline I, II, III, and IV; AZC Series: Zonelines built from 1987 to 1992 – includes AZR Series – Zoneline 1000, 2000, 2500, 2700, 000,
4000, 5000; AZ Series: Zonelines built after 1992 – Zoneline 2100, 100, 2600, 5100 / Zoneline 2200, 200, 5200 / Zoneline 2500, 500, 5500 / Zoneline 2800, 800, 5800.
10
RAK7012 (AZ Series*—2200, 2500, 200, 500,
2800 and 800 only)
Duct Adapter for Replacement of
A-B with Rounded Front AZ Chassis
The RAK7012 duct adapter is designed to line up with the duct
extension where the original chassis was a flat-top discharge
A-B Series. Using the RAK7012 will allow the existing duct
extension to be used without requiring the relocation of the hole
through the wall to the adjacent room. Discharge grille, end
plate, and extension mounting hardware must be removed from
old duct adapter and installed on the RAK7012.
RAK702 (AZ Series*—2100 and 100 only)
Duct Transition for Replacement of
AZC with Sloped Front AZ Chassis
The RAK702 duct transition is designed to allow duct installation
where the original chassis was a slope front discharge (AZC or
AZR) chassis. Using the RAK702 will allow the existing duct
adapter and extension to be used without requiring the
relocation of the hole through the wall to the adjacent room.
RAK7022 (AZ Series*—2200, 2500, 2800, 200,
500 and 800 only) Duct Transition for Replacement
of AZC with Rounded Front AZ Chassis
The RAK7022 duct transition is designed to allow duct installation where
the original chassis was a slope front discharge (AZC/AZR/AZ21/AZ1)
chassis. Using the RAK7022 will allow the existing duct adapter and
extension to be used without requiring the relocation of the hole through
the wall to the adjacent room.
RAK201 (AZC and AZ Series*)
Access Plate Cover
The RAK201 access plate cover is made of heavy-gauge steel
with multiple knockouts for special applications. Will adapt to
service conduit .875" or 1.125"; circuit breaker up to 0 amp or
0 amp receptacle. The RAK201 fits old sub-bases RAK120,
RAK121 and RAK122 for easy replacement of A-B series with
AZC and AZ series.
Advertisement
