9. Attach the Knee Pad (21) to Pad Frame (10) with
two M6 x 75mm Screws (35) and two M6
Washers (36).
10. Attach a Pin (18) to the Upright Base (3) with an
M4 x 19mm Screw (45).
Attach the Pivot Arm (9) to the Upright Base (3)
with the Pin (18). Make sure the Pin is inserted
all the way through the Upright Base and
Pivot Arm.
11. Slide two Resistance Bands (19) onto the indicat-
ed tubes on the Support Frame (15) and Pivot
Arm (9).
Attach the Cable (33) to the Support Frame (15)
and Pivot Arm (9) with two M8 x 25mm Screws
(41). Make sure that the cable ends pivot
freely on the Bolts.
9
21
36
10
11
41
33
41
19
9
10
36
35
35
3
45
9
15
9
18
19