PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M8 Curve Washer (39)
M8 Washer (46)
M6 Washer (36)
M10 Nylon Locknut (44)
M4 x 19mm Screw (45)
M4 x 16mm Screw (42)
M8 x 15mm Screw (51)
M3 x 30mm Screw (49)
M8 x 19mm Screw (38)
M8 x 25mm Screw (41)
M6 x 38mm Screw (50)
M10 x 50mm Bolt (48)
M10 x 70mm Bolt (52)
M6 x 75mm Screw (35)
M10 x 100mm Bolt (43)
M10 x 140mm Bolt (47)