Epic Fitness V 150 Power Tower Bench User Manual page 13

ADJUSTING THE KNEE PAD
To adjust the Knee Pad (21) to the up position, lift on
the Knee Pad so that the rod on the Pivot Arm (9) is
in the notch in the Pad Frame (10). Then lower the
Knee Pad so that the 15mm Spacers (34) are in the
top of the "L"-slot in the Pad Frame (10).
To adjust the Knee Pad (21) to the down position, lift
on the Knee Pad and slide the Pad Frame forward,
disengaging the rod on the Pivot Arm (9). Lower the
Knee Pad.
USING THE RESISTANCE BANDS
To add resistance to the Pivot Arm (9), slide a
Resistance Band (19) onto the tubes on the Pivot Arm
and the Support Frame (15).
Refer to the chart on the Fin (14) to determine how
many Resistance Bands (19) should be used.
Resistance Bands can be stored on the storage tube
when not being used.
WARNING:
Pad (21) without at least one Resistance Band
(19) connecting the Support Frame (15) to the
Pivot Arm (9).
Never use the Knee
21
21
13
9
Notch
"L"-slot
10
Rod
34
14
15
Storage
Tube
9
19