Epic Fitness V 150 Power Tower Bench User Manual page 11

15. Attach the Fin (14) to the Upright (4) and Support
Frame (15) with three M4 x 19mm Screws (45).
16. Attach a Pin (18) to the Backrest Frame (8) with
an M4 x 19mm Screw (45).
Insert the Pin (18) into the Backrest Frame (8).
17. Attach the Backrest (22) to the Backrest Frame
(8) with an M6 x 38mm Screw (50) and an M6
Washer (36).
Attach the Backrest (22) to the Support Frame
(15) with two M6 x 75mm Screws (35) and two
M6 Washers (36).
18. Make sure that all parts have been properly
tightened before the exercise rack is used.
15
15
16
17
8
22
11
45
4
14
45
8
18
45
36
50
35
36
36
15
35