Epic Fitness V 150 Power Tower Bench User Manual page 10

12. Hold the Dip Arm (11) behind the Backrest Frame
(8) as shown. Attach the Dip Arm to the Backrest
Frame with two M10 x 100mm Bolts (43) and two
M10 Nylon Locknuts (44). Do not overtighten
the Locknuts; the Dip Arm must be able to
pivot easily.
13. Attach the Right Pad Base (27) and an Arm Pad
(25) to the Dip Arm (11) with two M6 x 75mm
Screws (35) and two M6 Washers (36).
Repeat this step with the Left Pad Base (26)
and the other Arm Pad (25).
14. Tighten a Knob (24) into the Dip Arm (11).
Press a Dip Arm Bushing (30) into the Dip Arm
(11).
Pull the Knob (24) out as far as it will go. Slide
the Dip Handle (12) into the Dip Arm (11). Engage
the Knob into the Dip Handle.
Repeat this step on the other side of the Dip
Arm (11).
12
11
43
8
13
27
36
35
14
10
44
43
25
11
36
25
26
11
30
24
12